Advice for consumers purchasing electrical products

Need advice on buying safe, reliable electrical products this Christmas? Check out this interview.

Open Evening for a tour of our Environmental test facilities

Join us at our complimentary open evening to see and experience our comprehensive environmental test facilities on the 10th November 2015.

Held at our purpose built test facilities in Fareham we will be providing live demonstrations of the conditions our climatic and mechanical test equipment can simulate. Our expert staff will be on hand to explain the processes involved and highlight how testing can not only help manufacturers with product compliance but also make sure that products can survive the environments for which they are intended.

This is a good opportunity for you to see first hand how products can be tested, gain an understanding of the importance of testing, see our state of the art facilities and also have the opportunity to get together with other attendees and our experts.

Date: 10th November 2015 - Fareham, Hampshire - BOOK HERE

Time: 6.00pm - 8.30pm

EMC Confidence / Product Screening Checks

Are you importing, distributing or selling electrical products? If so you may well be legally responsible for product compliance and CE marking.

That’s where we can help, EMC is a key part of the mandatory CE marking process in Europe and moreover a product with poor EMC performance may give you an unprecedented level of returns and reflect badly on your company image and reputation. That’s why our confidence / product screening services are invaluable. We can carry out a rudimental risk assessment and conduct confidence testing with results presented in an easy to read, traffic light style, report indicating performance level to help you decide your next steps.

For more information click here.

Free Webinar; Introduction to the physical agents Directive (EMF)

Join TÜV SÜD Product Service for Introduction to the Physical Agents Directive (EMF) on Tuesday 29th September 2015 at 2pm.

The Physical Agents Directive (EMF) 2013/35/EU is one of a number of Directives that introduces measures to encourage improvements in the safety and health of workers at work across the EU, specifically regarding the exposure of workers to the risks arising from electromagnetic fields.

Member State legislation is due by 1 July 2016 therefore industries have time to consider their health & safety arrangements and prepare/update their policies and procedures to comply with the PAD (EMF). Technically the PAD (EMF) adopts guidance from the international body ICNIRP but has some different approaches. A ‘Practical Guide’ will be produced to assist with meeting the PAD (EMF) but is not yet issued so in the meantime we will look at the PAD (EMF) requirements and their expected implementation.

To find out more and to register for the webinar, please click here.

FREE Machinery Safety Essentials Workshops

Machinery Safety Essentials Workshop -
half-day workshop

Dates and Locations:   

22nd September 2015 - Billingham - BOOK HERE
20th October 2015 - Fareham - BOOK HERE

Price: Free

Time: 9am - 1pm

This workshop will provide you with an overview of the essential machinery safety requirements that affects any involved in the purchasing, operation and maintenance of machinery and equipment.
Topics covered will include:

• An introduction to the Machinery Directive
• An overview of the PUWER Regulations
• The principles of Electrical Machinery Safety
• Safety Related Control Systems & Functional Safety
• Q&A and Lunch

Does your device require a wireless module? join our webinar for an overview of wireless module integration

http://www.tuv-sud.co.uk/uk-en/resource-centre/webinars/registration/wireless-module-integration This webinar will present an overview of Wireless Module Integration and what you need to be aware of for European (CE marking) and North American compliance. With the increase in use of wireless modules in all kinds of device understanding this subject area has never been more important. The webinar will cover - what are wireless modules, regulatory requirements when integrating wireless modules (Europe, FCC and Industry Canada) and common issues (things to be aware of). Join us on Thursday 27th August 3pm -------------------------------------------------------------------------------- EXPERT PROFILE: Michael Lowry Michael Lowry is a Commercial Manager at TÜV SÜD Product Service with almost 20 years experience in wireless compliance, covering multiple product types. He has extensive knowledge of the R&TTE Directive, Marine Equipment Directive, FCC and Industry Canada rules.

IEC 60601-1-2:2014 now added to our UKAS accreditation

In February 2014, the IEC published IEC 60601-1-2:2014, edition 4.0 for Medical EMC, there are a number of significant changes in the 4th edition including new immunity requirements and for the first time risk management must be considered. For more information and to find out how we can help you ensure your medical electrical equipment complies with the 4th edition, email info@tuv-sud.co.uk

Book now for our Introduction to the EMC Directive Training Course on the 17th September

Introduction to the EMC Directive - one-day course

 

17th September 2015 - Fareham - BOOK HERE - http://www.tuv-sud.co.uk/uk-en/activity/training-people-certification/introduction-to-the-emc-directive

The European Union Electromagnetic Compatibility (EMC) Directive 2004/108/EC requires manufacturers and suppliers of equipment to comply with essential regulatory requirements before the equipment is placed on the market or taken into service. Compliance prevents interference with radio reception for example and ensures adequate immunity of the electrical and electronic equipment to electromagnetic noise within the environment.

Equipment comprises Apparatus and Fixed Installations. Apparatus (electrical/electronic products within the scope of the EMC Directive) must carry CE Marking.

Fixed Installations comprise particular combinations of permanently installed apparatus. Since 20 July 2007 there are now legal EMC requirements for new or modified fixed installations such as appointing a Responsible Person to hold technical documentation demonstrating the application of good engineering practices.

A new EMC Directive 2014/30/EU will be transposed by April 2016 and introduces new responsibilities for ‘economic operators’ i.e. manufacturers, importers and distributors to improve market surveillance. Notified Body operation will also be revised.

This course provides an overview of manufacturers and suppliers responsibilities and how they are discharged explaining the differing requirements for apparatus and fixed installations and the compilation of Technical Documentation.

Beware of changes to your machinery

Neil Dyson of TUV SUD Product Service looks at the what 'substantial' change means in regard to machinery changes, and how this might impact on your CE declaration . . . http://www.industrialtechnology.co.uk/search--beware-of-changes-to-your-machinery.html

Environmental Testing at TÜV SÜD Product Services

Bring on the water – TÜV SÜD’s tips on high-pressure washers

The days are getting longer and the birds have started chirping again, sure signs that spring is round the corner. With the first rays of sunshine, most of us dig out our bicycles, garden furniture and other hot-weather items to get them ready for the summer. Bringing patios, cars and house façades up to scratch after the winter weather is also a good idea, and using a high-pressure washer is the easiest and best way to do so. TÜV SÜD’s product experts have some tips for buying and using this type of cleaning equipment.

What models are available?

There are various categories of high-pressure washers on the market. Buyers should make their choice depending on their future areas of application and frequency of use. Standard high-pressure washers use water from the domestic water supply system. However, there are also high-pressure washers that can be operated with service water from water reservoirs, such as rainwater tanks – an advantage at locations without domestic water supply systems and a very environmentally-friendly solution, as it saves on drinking water. The cleaning performance depends on the water pressure and amount of water used. Persistent soiling can be removed more easily if water volume and water pressure are carefully aligned to each other. As a matter of principle, high-pressure washers should have a capacity of 6 to 10 l / min. The service pressure should be at least 100 bar, corresponding to a motor capacity of around 1.5 to 1.6 kW. High-pressure washers with these specifications are adequate for normal household use. Another important factor is the length of the hose. The longer the hose, the greater the area that can be cleaned.

Low-price high-pressure washers often include a large number of parts made of plastics, including the pump and the connections. Brass would give a significantly longer service life. Professional high-pressure washers mostly have stainless steel components, but are too expensive for normal household use. Non-pros often find it impossible to check up on these characteristics in a fully assembled high-pressure cleaner. One possible solution is to carefully read the product description or ask the manufacturer.

What accessories are available for high-pressure washers?

Many high-pressure washers offer smart solutions for stowing hoses, power cords, cleaning detergents or other accessories. Buyers looking for an even more convenient solution can buy a cleaner with a hose drum. The same goes for the power cord – some high-pressure washers even offer automatic cord winders. Most low-end devices do not have solutions for stowing accessories. However, this is not really necessary for high-pressure washers that are used only occasionally. Some manufacturers offer accessories such as flat-surface cleaners for patios or façades, pipe cleaners and rotor nozzles. The latter produces a rotating pencil jet, and thus combines the characteristics of a hard pencil jet with the benefits of easier cleaning of a large area.

Car cleaning with a high-pressure washer – recommended with reservations?
High-pressure washers are real all-rounders; bicycles, garden furniture, fences, vehicles, swimming pools, patios, building façades and many other items can be cleaned with water under high pressure. However, before going on a cleaning spree, buyers should read and heed the instruction manual that comes with the device. It is recommended to always use outdoor plug sockets, as these are connected to residual current devices that reduce the risk of an accident. When starting the cleaning process, first carefully direct the high-pressure jet at the soiled area from a considerable distance away, to check the surface is suitable for high-pressure cleaning. Never aim the jet stream at people, animals or the equipment itself. If a defect occurs during use, immediately switch off the cleaner, pull the plug and contact customer service or an electrician.

Car tyres should never be cleaned with a high-pressure washer. In fact, cleaning cars on your own home ground is not such a good idea at all as a matter of principle. Many districts have banned car-washing by residents at home for environmental reasons, to prevent water pollution from the runoff, and may impose punishment in the shape of a fine even if the car is only hosed down with water.

TÜV SÜD explains process maturity according to the new ISO 9001

The final version of the revised standard for quality management systems is scheduled for release by the International Organisation for Standardisation (ISO) in autumn 2015. Many organisations have already started to address the expected changes, which are aimed at strengthening the benefits of quality management. To optimise their own processes they need to determine their status quo and identify approaches for introducing improvement. TÜV SÜD's experts provide information about how organisations can identify the maturity of their processes and initiate changes.
 

The revised ISO 9001 offers more flexibility regarding process documentation as a part of the management system. This applies to the documentation of management, strategy and core processes as well as support processes such as maintenance and qualification of persons. For very simple processes, for example, clear verbal instructions in conjunction with training material may be sufficient. Generally, however, traceable documentation in forms such as a checklist or an electronic workflow will be required to provide guidance for various work steps. To safeguard a high level of process quality, the new ISO 9001 includes an ambitious eight-step definition of the expected degree of process maturity. The relevant quality characteristics should be available and effective at each of these eight steps to ensure that organisations implement the standard successfully and realise the benefits offered by the new standard.  

 

"At steps one and two, organisations define the inputs required and the outputs expected from their processes and the sequence and interactions of these processes in a form such as a process map or individual process sheets," says Ulrich Wegner, Head of the Certification Body of TÜV SÜD Management Service GmbH.

"At step 3, the organisation also review the responsibilities and authorities for these processes, using tools like responsibility matrices." Once this is completed, at step four organisations are expected to identify the technological and human resources needed. "Important aspects in this context include personnel and investment planning to respond appropriately to cases such as evident fluctuations or planned market expansion", adds Wegner.

At step five of process maturity, the focus is on risk-based thinking. To this end, organisations verify that they have identified all risks relevant for the key processes. Beyond the financial risks already analysed by many companies, there are other risks including the availability of expertise among knowledge owners and specialists, or market risks caused by innovative competitors. A quality management system according to the new ISO standard identifies these risks in direct association with the processes established by an organisation. While the old ISO 9001 focused predominantly on the avoidance of risks through appropriate preventive actions, the revised version also considers chances. To identify these chances, the detail-oriented process focus should be expanded to view the whole picture, particularly including customers' expectations and the context of the organisation.

 

Effective process operation and control are ensured at step six. This requires organisations to have either clear instructions for simple tasks in the service sector or process-integrated solutions, e.g. an ERP system, for complex production operations. Depending on the complexity involved, this step requires fast feedback or control loops and adequate communication. At step seven, the processes are evaluated with the help of appropriate monitoring and measurement methods. These are required in cases in which technical or personnel risks or instabilities were identified and, in particular, in cases involving risks related to customer requirements. Checking at an early stage for possible signs of non-conformities with the target is recommended. After all, a high level of accuracy in measurement results is of little use if the results are available too late. At step 8, the data gained from process evaluation enable management to make a robust decision regarding the necessary improvement actions. As outlined above, the process approach of the new ISO 9001 ensures a high level of transparency and thus supports organisations in the targeted triggering and driving of the improvement process.

 

Further information can be found at www.tuev-sued.de/management-systeme/iso-9001.

RF & Wireless Forum

TÜV SÜD are exhibiting at the RF & Wireless Forum in Cambridge on 24th March, where we will be showcasing our extensive testing and certification services for the telecoms industry.

 

This one day forum is free of charge and focuses on high growth technologies and markets. The day will consist of a series of short technical presentations and workshops supported by a networking and desktop presentations area with key industry speakers.

To read more click here.

150 years ago: Big bang for technical safety in Germany

Munich/Mannheim. Shortly after 1 pm on 28 January 1865, a steam boiler exploded in the Aktienbrauerei, a Mannheim brewery. The accident rocked the city, claiming one life and injuring four. Caused by insufficient water levels, excessive pressure and poor maintenance, it jolted local steam boiler operators into establishing an organisation aimed at increasing the safety of technical plants and systems. The “Association for Supervision and Insurance of Steam Boilers, domiciled in Mannheim”, the predecessor to today’s TÜV SÜD, was founded in 1866. In the 150 years since then, the concept of an independent and impartial testing organisation has become firmly anchored throughout the world. Today, TÜV SÜD has around 22,000 employees and a global network of operations – while remaining true to its roots. The company applies high-calibre expertise to test technologies and products and ensure they are reliable, safe and sustainable.

 

Read more

The next complimentary webinar from TÜV SÜD: Functional Safety of Medical Devices

Medical devices are among the most highly regulated products in the world today. A single functional failure can mean the difference between life and death for patients. The World Health Organisation has recommended that governments worldwide make national regulations for medical devices an integral part of their overall national health systems.

Ensuring the functional safety of medical devices is critically important for manufacturers, importers and resellers, as these devices can impact the health and wellbeing of the operators and patients that use them. By undertaking risk analysis and manufacturing medical devices that are functionally safe, your company benefits from increased market acceptance and positive brand associations. Failure to ensure functional safety can have dire consequences.

To find out more and to register for the webinar, please click here.

TÜV SÜD are hosting the next webinar 'Global Market Access - taking your products global' on the 29th January

Manufacturers, importers, retailers or traders seeking to bring their electrical and electronic products to the global market face challenges in managing compliance with technical regulations. In the absence of harmonised standards and requirements as well as differing national standards across countries, manufacturers need to be aware of the regulations for each country they want to access.
 
Global Market Access (GMA) is the process of determining applicable regulations and managing product compliance to those regulations with respect to accessing global markets.

For more information and to register, please click here.

New E-book: Quick access to global markets for electrical and electronics

TÜV SÜD is pleased to announce a new e-book that details key requirements for global market access. It demonstrates the importance of accounting for these requisites early in the product design phase to shorten product launch cycles and maximise profitability.

Read more